HP Removable Adhesive Fabric, 3-in Core, 100′ Length

$208.00$520.00

 

Description

Easy to install, reposition, and remove
Enjoy the ease of working with this repositionable adhesive-back fabric that is easy to install, reposition, and remove with virtually no residue. The special adhesive is designed to stick to non-porous surfaces to create seamless, photographic image quality wall and floor graphics. Tested and approved for indoor smooth floor graphics.

Reduce the environmental impact of printing
Offer an adhesive fabric that complies with high health standards. Help meet environmental and safety objectives with this REACH compliant, flame-resistant adhesive fabric.

Grab attention with vibrant image quality for a variety of applications
Capture realistic graphic detail for applications from wall murals and event signage to retail displays. Achieve a high-quality look with this versatile, easy-to-handle, repositionable self-adhesive fabric—ideal for a wide range of indoor and outdoor applications.

Target customers Applications Benefits

Print service providers

Wall murals

Designed for easy installation, repositioning, and removal without wrinkles or tearing for a wide range of applications

Government agencies

Wall cut-outs

Ability to contour cut and apply without stretching

Graphic artists

Indoor and short-term outdoor signage

Smooth, matte finish for deep blacks, vivid colors and high ink saturation

Sign shops

Point-of-purchase displays

Outstanding photographic image quality

Retail

Trade show graphics

Class A, ASTM E84 flame resistance2

Decals

REACH compliant1

Window graphics

Original HP Bright Office Inks, HP Vivid Photo Inks, and HP Latex Inks

Floor graphics

Slip resistant for floor graphics4

Technical Specifications


Ink compatibility

Compatible with HP Bright Office Inks, HP Vivid Photo Inks, PageWide XL and HP Latex Inks

Core size

3-in core with a removable 2-in adapter

Weight (With liner)

289 g/m² per ISO 536 Test Method

Thickness (With liner)

304 microns/12 mil per ISO 20534 Test Method

Liner

120 g/m², double-sided PE-coated silicone paper

Adhesive

Clear, removable, and repositionable adhesive

Removability

Up to 3 years removable/repositionable indoors

Opacity

Greater than 85% per TAPPI T-425 Test Method and ISO 2471 Test Method

Brightness

Greater than 87% per Tappi-T452 Test Method

Whiteness

118 per ASTM E313-98 Test Method

Finish

Matte

Slip rating

Certified according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586)4

Operating temperature

15 to 25° C / 59 to 77° F

Operating humidity

20-80% RH

Water resistance

Moderately water-resistant3

Wind orientation

Print side out

Dry time

Immediate

Flame resistance

Class A, ASTM E842

Lamination

For additional protection, liquid or spray coatings are recommended

PageWide cutter

The weight of this material is higher than the recommended weight limit for the HP PageWide XL cutter, which may reduce the expected life of the cutter

Shelf life

1 year, unopened in original packaging

Storage temperature

10 to 27° C / 50 to 80° F

Storage humidity

35 to 65% RH

Environmental

REACH compliant1

Finishing/post-processing

Use a carbide knife for kiss and die-cutting

Installation tip

To install the graphic, peel 101 millimeters (4 inches) of the release liner off the graphic and place on wall or surface. Continue to peel back 101 millimeters (4 inches) of the liner incrementally while mounting.

 Footnotes

1 As of the date of this document, this product does not contain any of the chemicals on the EU’s Candidate List for Authorization (otherwise known as Substances of Very High Concern) in concentrations exceeding 0.1%. To determine the status of SVHC in HP products, see the HP REACH Article 33 Declaration published at HP Printing Products and Consumable Supplies.
2 Class A, ASTM E84 approved fire certifications.
3 Performance varies based on printer and print profile. Water resistance testing by HP Image Permanence Lab on a range of HP media and follows ISO 18935 method. For more information, see HPLFMedia.com/hp/printpermanence.
4 Recommended on indoor smooth, non-porous, sealed flat and dry surfaces for up 3 months. Slip resistance for dry environments based on third-party testing, June 2020, according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586).

Additional information

width

24", 36", 42", 54", 60"